Full gutter clear-out
All leaves, twigs, grit and sludge removed by hand along every run.
Blocked gutters don't just overflow messily — they push water back under the roofline and down the fascia, which is how a full gutter ends up causing roof-leak symptoms. In leafy Sydney suburbs, gutters full of gum leaves, twigs and silt are the single most common cause of overflow problems we see.
Cleaning is done by hand with the debris bagged and removed from site, not hosed into your downpipes. While we're up there, every gutter and downpipe is flushed and visually checked for splits, sagging brackets and rust — small faults get flagged in the written report before they turn into repairs.



All leaves, twigs, grit and sludge removed by hand along every run.
Downpipes flushed to confirm water actually exits, not just enters.
Valleys and roof edges cleared where debris collects before it reaches the gutter.
Every clean includes a visual fault check with anything found noted in writing.
For most Sydney homes, once a year is enough. Houses under large eucalypts or pines, or in bushland-adjacent streets, usually need a clean every six months — gum trees drop leaves continuously rather than seasonally. After a major storm, a check is worth booking regardless of schedule, since one good wattle branch can fill a valley.
The honest test is simple: during rain, watch the downpipe outlets. If little or no water comes out while it's pouring on the roof, something upstream is blocked. Overflow over the outer edge at a low point means a silted section that needs clearing before the weight pulls the brackets out.
Because the failure mode is expensive and invisible from the ground. Standing water in a blocked gutter works its way into the fascia and eaves, and in summer the same debris load is a bushfire ember risk. Regular clearing is the cheapest roofing maintenance there is, and the included fault check catches loose brackets and early rust before they become repair jobs.
Anyone quoting a firm price before seeing your roof is guessing. What we can tell you is what drives the number:
The single biggest factor.
A targeted repair costs less than restoring or replacing a whole roof.
Roof pitch, height and site access all affect the job.
Colorbond, tile and slate carry different costs and different lifespans.
Removing an existing roof or gutter system costs more than working on a prepared surface.
30 seconds. Service, suburb, contact details.
Within our contracted response time on business days, to talk through the job and book a time.
We assess the roof, identify the cause, and answer your questions.
Itemised, with what's included and what would change the price.
Scheduled around you, with a clear start and finish date.
A look at the range of jobs we handle across Sydney and the greater Sydney region.
Before: debris-loaded gutter
Clearing valleys and edges
Flushed and flowing